|
NFC Tag IC |
Dual Ported EEPROM |
click to enlarge
|
SIC4310 : Dual Ported EEPROM With NFC & UART Interfaces
- Enables simplified NFC/RFID phone compatible interface
- Significantly reduced cost compared to reader interfaces
- Direct Data transfer from RFID to UART or vice versa
- Operating from either RFID power or external DC
- 3.3V On-chip regulator for power harvesting mode
- Up to 10 mA source to power external circuit*
*Depending on harvested power from RF
- Compatible with NFC Tag Type 2
|
|
|
HF Reader IC |
13.56MHz Multi-Standard |
|
SIC9410 : 13.56MHz Multi-Standard RFID Reader ASIC
The SIC9410 is a single chip lang-range reader ASIC for all popular 13.56MHz RFID protocols
- Supports all common 13.56Mhz RFID protocols including ISO 14443A/B, ISO 15693, and MIFARE Classic
- Reference Hardware Designs
- Sample Firmware and Demo Software to Speed Development
- EMV Specific Enhancements Improve Performance
- Level 1 EMV Compliance - EMV development kits simplify development and testing
- Low Power Consumption
- On-Chip Dual 80mA 3.3v Regulators - helps to reduce components in complete system and hence costs
- Competitively Priced
|
|
|
SIC-S9 : 13.56MHz Multi-Standard (Excluding MIFARE Classic) RFID Reader ASIC
The SIC9 is a single chip lang-range reader ASIC for all popular 13.56MHz RFID protocols bar full access to MIFARE CLASSIC. The exclusion of the latter removes the cost of of a NXP license. If required please see SIC9410.
- Supports all common 13.56Mhz RFID protocols including ISO 14443A/B, ISO 15693, and MIFARE Classic
- Reference Hardware Designs
- Sample Firmware and Demo Software to Speed Development
- EMV Specific Enhancements Improve Performance
- Level 1 EMV Compliance - EMV development kits simplify development and testing
- Low Power Consumption
- On-Chip Dual 80mA 3.3v Regulators - helps to reduce components in complete system and hence costs
- Competitively Priced
|
|
|
Reference Design |
HF Reader Module |
PI931
|
SIC9xxx Reference Design Module
The Pi-931-EMV is a reference design of SIC9410, a high-performance RFID contactless reader IC from Silicon Craft technology. The Pi-931-EMV supports all major global secured baseband ISO standards, including 14443 Type A, Type B, MIFARE classic cards, and smart label ISO15693. All data rates in ISO14443A/B, ranging from 106 to 848 kbps, are supported. For ISO15693, all data rates used in uplink, downlink, and ultra-high speed can be performed. Typical read range for MIFARE card is 7 cm whereas typical for ISO15693 49x49mm label is 16 cm.
Equipped with a powerful 32-bit ARM-CORTEX STM32F10x microcontroller, the Pi-931-EMV is able to effectively handle RF activities through designed module protocols. Embedded with ISO14443-and ISO15693 supporting routines, the Pi-931-EMV can perform not only elementary commands but also one-stop combo commands, such as reading data through MIFARE encryption, which are available to ease the development for the beginners.
- SIC9xxx Reference Design Module
- Demonstration Kit Includes - Demo Software with Source Code, SIC SDK, Firmware
- ISO14443A/B, MIFARE Classic, Mini, Ultralight(C), ICODE, NFC Tag Type 1, ISO15693 and Felica
- Full speed USB 2.0, RS232 TTL Interfaces
|
|
|
|
